Concrete Masonry Services NY: Painting Concrete Steps

Depending on the location of the steps, they can be a pain in the eyes. From your basement to the front balcony stairs, these steps can last a lifetime, but it will take a lot of effort and time to take care of them. But you would be surprised how far a simple paint coat can freshen up the structure. Make sure that they are repaired before starting your Do-It-Yourself project. You can contact concrete masonry services in NY in NY to get the right quote from professionals, for free.

Painting the concrete steps

When choosing what paint to use, you will want to pick a certain paint for indoor and outdoor use. The best one to use is epoxy paints. If you are doing design or pattern that involves different colors, make sure that they are all suitable to be used for concrete.

As far as the color goes, most, if not all paint colors used for concretes are neutral. To get a good, natural look and fresher look, stick to colors with gray hues. If you are looking for lower maintenance and a high traffic area color, a darker shade will look good. You need to keep in mind that if you are painting the outside of your house, you will need to make sure that the concrete that you are painting is completely dry.

Because it can hold a lot of moisture, you need to check the weather first before you start your project to make sure that there are no rainy days during and after you paint the concrete.

How is concrete made? Check out http://www.madehow.com/Volume-1/Concrete.html for more information.

Concrete steps repaired

Painting a step can be an excellent way to refresh the look of your space, but it will not fix any damage on your staircase. Small cracks can be repaired easily using filler cement, but a more massive crack can a bad sign for you to hire a professional to fix it. It could be because of a crack in the foundation of your house. The average repair cost for a damaged foundation can range from $3,000 to $4,000. Materials you will need to do this Do-It-Yourself project include:

Broom

Scrub brush

Masonry and cement filler or sealant

Bucket

Cement cleaner

Paintbrush

Cement paint

Paint roller

Masonry paint primer

Painter’s tape

Step 1: Fill all the holes

Clean the stairs by sweeping all the debris and grimes. If you do not need any significant repairs on the steps, there are likely some scratches or small cracks that are needed to be filled. It needs to be done before you start painting the steps. Follow the masonry and cement filler instruction guide on how to use it.

Step 2: Clean all the holes

You may be surprised to know that you need to scrub the cement before painting them. Especially when you are painting outdoors concretes, there is a lot of grime that could have accumulated on the structure over time. Depending on the condition of your steps, you can make a cleaning solution of soap and warm water to clean the steps. But a lot of homeowners are using TSO cement cleaners for tougher grimes on the steps.

To know more about concrete cleaners, click here.

It can be a bit stronger, though, so you need to make sure to wear protective gears like gloves and goggles before handling the chemicals. Make sure that the stairs are completely dry before moving on.

Step 3: Make a plan for your design

Some owners want to do creative projects with the paint design of their steps. If you are choosing this, it is time to use a painter’s tape to make a mark on the location where you want to put paint on. If you are painting a faux runner, measure the wall equally and place painter’s tape, so all sides are even. Use it to tape the areas on the floor or walls to avoid putting any damage on the.

Step 4: Apply primer

You have to make sure that the surface is free of any debris and they are clean before you start putting paint. Applying primer is imperative when you are working with concrete steps because it helps bind the concrete and paint together. Most paints need to be primed before the color of the paint will come out, but some do not need a primer. If that is the case, skip this step. Apply primer to every step and make sure all parts are appropriately painted.